It’s frustrating to have a child’s bike with pedals that are too big for the child. The pedals are in the way and cause children to trip, fall, scrape up their knees, and generally get frustrated. You can solve this problem by removing the pedals from the bike. The process is quick and easy, even if you don’t have any mechanical ability or experience.
This article will guide you on how to remove the pedals from a bike for children.
The first thing you need to do is find the screw that is located on the side of the pedal. You can use a hex key or a flathead screwdriver to loosen it. Once you have loosened it, turn it counter-clockwise until the pedal pops off. If your pedals are attached with bolts, then you need to unscrew them using a wrench or pliers. So your job is done, the pedal will now remove and will fall automatically on your hand!
Different Types of Tools You Need to Remove Pedals from a Child’s Bike
Pedal removal tools are a must-have for any parent. Whether you’re removing pedals from a bike or changing the pedals on your child’s bike, these tools can help you do it easily.
There are many types of pedal remover tools that you can buy, but there are also different ways to remove pedals without any tool. You can use a screwdriver to take off the pedals, but this may damage the bike frame and the pedal. However, only a pedal wrench or a hex key is the mandatory tool to take the pedals off your kid’s bike.
The 6-Step Process of Removing the Bike Pedal:
Every year there are thousands of injuries caused by the improper use of bike pedals. In this guide, we will go step-by-step through the proper removal of any pedal, whether it be a training pedal, BMX pedal, or road pedal.
Many parents don’t know how to properly remove the pedals from their child’s bike. They usually resort to hitting the pedals with a hammer or screwdriver, which can damage the pedals and/or injure their kids in the process. These methods are not only ineffective but also unsafe, and should be avoided at all costs.
However, the first step to installing the pedals is to determine which pedal goes on which side. If you are left-handed, you will want to install the right pedal on the right side of the bicycle and vice versa. You will find that the right pedal is slightly longer than the left. It has a larger diameter and a rounded tip. The left pedal has a smaller diameter and a flat tip.
The right pedal has a drive-side crank arm, which means that you will be pushing the pedal down to the right to make it turn. If you are left-handed, you will want to install your right foot on the left side or drive side of the pedal. You will then press downward on this pedal to make it turn forward.
The 6-step process of removing the bike pedal is as follows
- Make sure the bike is on a level surface.
- Remove the front wheel from the bike frame by loosening the axle bolts and sliding off the axle to remove it from the fork.
- Find a suitable place to lay down your bike so you can work on it with both hands, such as a table or bench, or you can balance it against something solid like a wall or railing.
- With the assistance of an Allen wrench, unscrew and remove your crank arm bolts by turning them counterclockwise until they are loose enough to allow for the removal of your crank arms from your bottom bracket shell. You can then remove them safely to the side.
- Now hardly push on the spindle to loosen both side pedals. (For the left side pedal-push clockwise and for the right side pedal push counterclockwise).
- Until the pedals are totally free from the bike continue the spindle rotation either on clockwise or anticlockwise moves (depending on which sided pedals).
However, let’s give you some pro tips to instantly remove the pedal/flat tire/break chain from your kid’s bike in an emergency situation.
This is incredibly useful in a lot of different situations. For example, if you are on a tour with your kids and your kid’s bike has a flat tire, you can use the screwdriver to easily fix it. Or if you’re on a ride and your chain breaks, you can use the screwdriver to tighten it back on.
The wrench is also very useful for adjusting your bike’s brakes. In fact, as long as you have it with you, you won’t need anything else in order to adjust your brakes. If your brake pads get clogged with dirt or debris, you can use the wrench to clear the clogs. If you can’t get a wrench on the nut, grab a hammer and hit it with a punch until the nut breaks free. You will need a Phillips head screwdriver and also some pliers. Remove the old pedal by twisting it counterclockwise with a pair of pliers or a pedal wrench.
FAQs:
Final verdict
Children’s bikes are often equipped with a training wheel system. This allows the child to ride without their feet touching the ground. It is important that you remove these pedals before your child begins to learn how to balance on the bike.
A bicycle is one of the best ways to get around. It’s inexpensive, environmentally friendly, and just plain good exercise. That’s why you need to know how to replace the bike pedals for your kids. Follow these simple instructions and in no time at all, you’ll have your kid riding again.
So that’s all about How to Remove the Pedals from A Kids Bike. Thank you for being connected here these few minutes!
